Warehouse Rack Systems

Conveyor Solutions, Inc. is proud to offer a wide variety of warehouse rack systems.  Much of our selection is available online however if you do
not see what you are looking for you can contact us.

	Beam Clamp - Provides an alternative method of securing steelwork and building service equipment to primary steelwork. Clamps new steel in position eliminating the need for drilling and welding while providing a high degree of adjustability. Provides a steelwork connection that is stronger, quicker and easier to install than traditional or competitive methods.
	Bulk Rack Decking -  Wire decking satisfies 50% open fire codes. 2 x 4 x 4 gauge wire. Flat wire deck shelf surface, with waterfall front and rear. Notched corners accommodate angle posts. Galvanized rust-resistant finish.
	Bulk Rack Shelving -  Unobstructed shelf openings maximize storage capacity.  Boltless bulk shelving is a low cost solutions to your storage needs. Engineered for greater shelf loads, thanks to heavy gauge steel construction. Does the job of several conventional shelving sections at a fraction of the cost. Shelves adjust on 1-1/2" centers.
	Drum Pallet Racks -  Heavy-duty cross beams are adjustable every 2" along the upright frame.  Portable drum cradles are made of 1-1/4" tubing to prevent premature drum wear.  High capacity drum storage with these all-welded 3" structural channel upright frames. Cradles included with each rack and are easily removable to allow palletized material.
	Drum Storage Racks -  Designed for orderly handling, selective storage and removal of 30 gal. and 55 gal. drums.  Made of heavy-duty steel angles for super strength.  Simply bolt four vertical legs to individual levels, attach x-bracing and rack is ready to accept drums. Shipped K.D. in carton. Convenient forklift entry front and rear.
	Heavy Duty Rivet Rack -  Rugged heavy duty beams use a double rivet design for added strength and rigidity. Channel type deck supports attach with just one bolt to bottom of beam flange and provide superior protection from deck sag. All components are formed from 16 ga. steel with a tough Gray baked enamel finish. Decks are made from furniture grade MDF which provides a smooth surface for sliding material on and off.
	Heavy Duty Z Beam Storage Rack -  “Z” step beams are made of rugged 14 ga. steel for maximum weight carrying capacity. Sturdy, 12 ga. beam connectors with reinforced 3-prong lug connection has a wedge angle design to provide a secure, stable fit. 16 ga. tie bars provide support to minimize beam rotation under heavy loads. Basic Starter connects quick and easy to Rack End. Use only one Rack End between sections when expanding in continuous rows.
	Industrial Pallet Racks -  Designed to provide virtually unlimited options in pallet rack storage.  Delivers an efficient, economical use of both floor and air space. Available in popular Tear Drop Design (TD) and Keystone (KS) "from stock". Easy to assemble, these racks pass the most scrutinizing analysis and contribute value, utility and quality. Pallet racks can easily interchange with other Tear Drop and Keystone style uprights and beams.
	Light Duty Rivet Rack -  Light duty beams unique design provides a rounded steel edge for sliding material on and off while protecting the MDF decking. Channel type deck supports snap in with no bolts. Angle posts hold MDF decking in place to provide the most uninterrupted usable storage area. Tie units together with post tie plates for increased strength and uniform spacing at less cost than tee posts.
	Medium Duty Cantilever Racks -  Sturdy and stable, these heavy-duty racks are built for years of rough use.  Installation is quick and easy. Convenient uprights facilitate manual loading and unloading and open base design affords easy forklift accessibility. Arms are adjustable on 3" centers up or down the full length of uprights.
	Open Area Rack Deck -  Features uniform strength across the entire surface, unlike wire decks. Attractive look with bright galvanized finish. Sized to fit the dimensions of your particular shelves. Tek-fasten to shelves at time of installation to insure against accidental disengagement.
	Pallet Rack Decking -  Durable 2" x 4", 4 ga. wire decking makes stored items easier to see and reduces fire hazards. Dust and dirt can't collect. Easy to use and install. Designed for step and box beams. Rugged reinforcing under channels are projection welded at intersections with sturdy steel wire deck mesh. Galvanized, won't chip, flake or rust.
	Solid Steel Rack Deck -  Here’s an economical and practical way to provide decking on your racks or mezzanines. This solid corrugated steel decking safely supports archive boxes, heavy packages, parts or supplies. The smooth surface allows easy sliding of material without danger of damage or splinters. Capacities are based on uniformly distributed loads. Fire resistant.
	Welded Wire Decking -  Welded wire decking makes inventory easier to see, reduces fire hazard and simplifies product handling.  Inventory stays cleaner--no place for dirt or dust to collect.  Here's strength with economy. Easy to install with minimum maintenance. Whether you are planning new storage racks or bringing your old ones up to current requirements, we will be happy to assist you.
	Wire Mesh Deck -  Wire mesh deck is constructed of 4 ga. wire mesh with 13 ga. support channels for a universal fit on step or box style beams. Galvanized finish after the welding process provides for maximum durability and a rust-free life. Capacities are based on evenly distributed loads.