Hytrol TW Wire Mesh Belt Conveyor
The Hytrol Model TW is a horizontal wire belt conveyor, which can carry hot or cold parts from ovens or freezers. This conveyor can handle wet or oily products, and is also suitable for use in drying operations.
- Bed – Roller bed, 6-5/8 in. deep x 12 ga. formed powder painted
- Belt – 1/2 in. x 1 in. galvanized wire mesh belt
- Belt widths -12″, 18″, & 24″
- Rollers – 1.9″ dia. x 16 ga. galvanized tread rollers
- Rods with turnbuckles are fastened to underside of bed to provide alignment of bed rollers to insure correct belt tracking
- 4 in. dia. tail pulley with 1 in. dia. shaft at bearings, with sprocket at each end
- Snub Idler – Adjustable 2-1/8 in. dia. pre-lubricated ball bearings
- Motor – 1/2 HP standard – 1 HP max.
- MS Type floor supports are available with a wide range of adjustment
- Capacity – Maximum load per linear ft. of conveyor is 75 lbs.
- Maximum product temperature is 350° F
- Belt Speed – Constant 65 FPM