Hytrol TL Heavy Duty Conveyor
The Model TL is optimal for long assembly line operations, inspections, testing, sorting, and packing. Its rugged construction allows for heavy-duty product transportation and a maximum load of 100 lbs. per linear foot. The Model TL can either be floor supported or ceiling hung.
- Bed – 6 – 5/8″ deep x 12 ga. formed powder painted
- Bed is available in standard 5 ft. and 10 ft. long sections, which bolt together with splice plates
- Standard Belt Widths: 24″, 30″, 36″, 42″, 48″
- Standard End Drive is located on discharge end of conveyor, chain guard is on left hand side
- 8 in. dia. drive pulley with 1 – 3/16 in. dia. shaft at bearings, machine crowned and fully lagged
- 6 in. dia. tail pulley with 1 – 3/16 in. dia. shaft at bearings, machine crowned
- Motor – 1 HP standard-2 HP max.
- Adjustable Floor Supports are available
- Capacity – Maximum load per linear ft. of conveyor; 100 lbs., not to exceed rated capacities
- Reversible (with Center Drive)