Right Angle Transfers

Hytrol Reversing O-ring Transfer

Hytrol Reversing O-Ring Transfers are used to move products at right angles to adjacent or parallel conveyor lines. It can be used with Models 138 and 190 NSP/NSPEZ line shaft conveyors. An air bag actuator lifts the transfer mechanism while powered O-Rings transfer the product. Linear bearings are used to guide transfer as it is raised and lowered, and air cylinders operate the reversing mechanism to reverse transfer flow.

  • Capacity – 75 lbs. maximum unit load
  • Transfer O-Ring – 3/8″ dia. polyurethane O-ring
  • Drive – Transfer is driven from 230/460/3/60, 1/2 HP shaft-mounted gearmotor

Client Gateway

Welcome to the Conveyor Solutions Client Gateway. Log In to Your Account.

Not Signed Up? To learn more about the benefits of the CSI Client Gateway, Click Here.