Hytrol PCX Parts-Low Profile Conveyor
The portable Hytrol Model PCX low profile parts conveyor is easily positioned under punch presses and extruding machines to catch small steel, plastic, or aluminum stampings, etc. The PCX quickly conveys small items up to a hopper or drum.
- Bed – 7-1/4″ in. deep x 12 ga. formed steel side channel with bolt-in slider bed which provides 1 in. high sides above the belt
- Belt widths – 12″, 18″, & 24″
- Belt – Black Trackmate 533 COS-PVC with 1 in. high steel cleats on 12 in. centers
- Belt Speed – 25 FPM
- End Drive located on discharge end of conveyor, chain guard located on left hand side
- 4 in. dia. drive pulley with 1 in. dia. shaft at bearings, machine crowned and fully lagged
- 4 in. dia. tail pulley with 1 in. dia. shaft at bearings, machine crowned
- Motor – 1/2 HP standard- 2 HP max.
- Capacity – 100 lbs. total distributed load
- Belt Scraper – mounted inside conveyor bed section to clean underside of return belt
- Portable Base Support – adjustable from 4 in. to 30 in.
- MS Type floor supports are available with a wide range of adjustment