Hytrol PCH Parts-Piano Hinge Belt Conveyor
The Hytrol Model PCH piano hinge parts conveyor features a hinged steel belt, which efficiently carries hot, oily parts from punch presses, forging machines, etc., to drums, hoppers, or other operations. Available configurations range from straight to Z type units.
- Bed – 8-5/8 in. deep x 10 ga. powder painted formed steel channel
- Belt – Piano Hinge metal belt with 12 ga. plain bottom aprons
- Belt Speed – 30 FPM
- Overhead End Drive is located on the discharge end of conveyor, and chain guard is located on the right hand side
- Overall Widths – 10-3/8″, 12-3/8, 16-3/8″, 22-3/8″, & 28-3/8″
- Drive Sprockets – 5 in. pitch dia. with 1-7/16 in. dia. shaft, 6 tooth
- Take-Up Sprockets – 5 in. pitch dia. with 1-7/16 in. dia. shaft, 6 tooth
- Motor – 1 HP standard, 2 HP max.
- PCHS Type floor supports are available with a wide range of adjustment
- Capacity – 35 lbs. per linear foot