Hytrol PCA Parts-Light-Duty Conveyor
The portable Hytrol Model PCA light duty parts conveyor is easily positioned in or under punch presses, injection molding machines, extruding equipment, and other equipment where small steel or aluminum stampings, plastic parts, etc. must be quickly transferred to hoppers or drums to consistently keep production on the move.
- Bed – 12 ga. formed steel troughed bed with 1″ high vertical sides
- Belt Widths – 4″, 6″, 8″, 10″, 12″, & 18″
- Belt Speed – 65 FPM
- 2-1/2 in. dia. drive pulley with 1 in. dia. shaft, crowned and fully lagged
- 2-1/8 in. dia. tail pulley with 7/16 in. dia. threaded shaft. Pre-lubricated ball bearings
- Overhead End Drive is located on the discharge end of the conveyor, and the chain guard is located on the left hand side
- Motor – 1/2 HP
- PCAS Type floor supports are available with a wide range of adjustment
- Capacity – maximum load per linear foot of conveyor is 10 lbs.