24 volt (low voltage) Live Roller Conveyor

Hytrol 190-E24C 24VDC Live Roller Curve Conveyor

The Hytrol Model 190-E24C 24 VDC Live Roller Conveyor uses a series of 24 VDC motors to drive the tread rollers, eliminating the need for drive belts, chains, or line shafts. Quiet operation and ease of maintenance and installation are just some of the advantages. E24 motors offer exceptional heat dissipation, impressive flexibility, low RPM and high torque. E24 Conveyors have an extremely long life expectancy with a 125,000 hour design life, which equates to 10 years of continuous operation. There is very little maintenance required since there are fewer moving parts in the motor, and therefore it is not necessary to stock multiple part numbers. The Decentralized Drive System is simple to install, and the smaller drives located throughout the length of the unit offer the ability to change speed and/or direction on specific zones.

  • All-Electric Operation
  • Adjustable MS-Type Floor Supports Available
  • Roller bed with 2-1/2 in. dia. tapered to 1-11/16 in. dia. x 16 ga. galvanized rollers. Mounted in 6-1/2 x 12 ga. powder painted formed steel channel frame
  • 3/16 in. dia. polyurethane O-rings slave-drive tread rollers from motor
  • Maximum capacity of 37 lbs. per foot with a maximum capacity of 75 lbs. per motor

Client Gateway

Welcome to the Conveyor Solutions Client Gateway. Log In to Your Account.

Not Signed Up? To learn more about the benefits of the CSI Client Gateway, Click Here.