 |
 |
- Rotates Products up to 360
- Standard Speed: 30 FPM
- 3 RPM
- Proximity Switches sense position and control
product rotation
- Variable speed control
|
|
|
| The 26 CRPT is used to rotate products up to 360
degrees. The turntable is powered by a shaft mounted
gearmotor complete with variable speed controller for soft
start/stop and has proximity switches mounted on base to
sense position and control rotation of product. Turntable
speed is 3 Revolutions per minute with a 1 HP 460/3/60
gearmotor. An 8-wire collector ring allows unlimited roation
of turntable. Powered transition rollers, mounted on apron
of turntable deck, help move product onto and off of
turntable. The 26 CRR section has a Top Side Mounted Drive
contained within the turning radius of the
turntable.Standard speed is 30 GPM with 1/2 HP 460/3/60
gearmotor. The tread rollers are 2-5/8 in. diameter with 7
gauge wall on 4 inch roller centers and have 2-5/8 in. dia.
x .219 wall drive rollers with heavy duty bearings. Also
available; gravity transition rollers; external transition
roller sections (mounted to mating conveyors in fill in gap
created by radius of turntable). Minimum Elevation - 16
inches. |
|
|
|
|
|
|
