Features/ Benefits:

• Compatible with standard Dorner bolt-on profiles.
• Easily adjusts for quick product change over.
• Attach additional guides to create multiple lanes.
• Create lanes, plows, merges, and transfers.

Specifications:

• UHMW guide surface on an anodized aluminum mounting rail.
• Painted Steel mounting hardware.
• Available in standard 1’ (305mm) increments or can be ordered to any length.
• 5” (127mm) maximum, 0.25” (7mm) minimum part height.
• 0.25” (6mm) minimum lane width.
• Package includes (1) lane guide, mounting hardware and adjusting knobs.
• For conveyors up to 24” (610mm) wide. Consult factory for wider lane guide availability.
• Metric fasteners only.

Specifications

• 0.88” (22mm) Diameter minimum product transfer for 2200 Series
• 1.25” (32mm) Diameter minimum product transfer for 3200 Series
• Hard coat anodized finish
• Package includes extruded aluminum transfer plate, required pulley tail plates
  and mounting hardware.
• Metric fasteners only.

Features/ Benefits:

• Pre-engineered guided turns adjust to a variety of products.
• Accepts standard Dorner bolt-on profiles outside of transfer area.
• Place adjusting rods where required.
• Easily adjusts for quick product change-over.
• Metric fasteners only.

Specifications:

• Accessories for Dorner conveyors up to 12” (305mm) wide.
• Requires low side conveyors.
• 0.25” (6mm) minimum part thickness.
• Hard coat anodized transfer plate.
• Painted Steel mounting hardware.
• 48” (1,219mm) long UHMW outside turn guide, customer can trim to fit.
• Maximum recommended part weight is 20 lbs. (9Kg) at 50 ft/min. (15 M/min.) belt speed. Consult factory regarding applications for higher product weights or faster belt speeds.
• 0.88” (22mm) minimum product size for 2200 Series
• Package includes outside turn guide, guide wheel, adjustable mounting hardware and extruded aluminum transfer plate.

Specifications:

• Provides a 6” or 12” wide working surface
• Adjusts in/out and up/down (.25” max above bedplate) for product transfer on/off conveyor belts
• Can be positioned anywhere along the conveyor
• Anodized aluminum work surface
• Max load: 5 lbs./Ft (6 Kg/M)
  Use Adjustable Tie Brackets for added capacity
• Available in 1’ (305) increments from 1’ (305) to 99’ (30,175)
• Compatible with 2200, LPZ, MPB & 3200 Series Conveyors

Specifications:

• Guides parts onto conveyor belt surface.
• Includes metric mounting hardware.

• Anodized aluminum stop
• Includes required mounting hardware

• Slides up and down T-slot length.
• Includes metric mounting hardware