|
Straight
Conveyor Features & Benefits:
-
Frame is constructed of
continuous TIG welded 304 stainless steel and is designed
with no horizontal surfaces for optimum cleaning. Conveyors
over 10’ (3048mm) consist of multiple sections which are
bolted together.
-
All bearings are 400
stainless steel, filled with H1 FDA lubricant and mounted in
cast stainless steel housings for maximum performance in
washdown environments.
-
Solid bed plate (optional)
is stainless steel and locates on UHMW strips for delicate /
fragile products.
-
Belt tensioning mechanism is
constructed of 304 stainless steel and uses Acme threads for
easy cleaning. Externally mounted to the frame with adequate
clearances for cleaning.
-
Conveyor is designed to
withstand high pressure (100-1500 PSI) spray and chlorinated
solutions.
-
Frame cut-outs (optional)
are available to allow spraying the inside of the conveyor
without lifting the belt.
-
Return Belt Supports are 4”
UHMW Rollers and are easily removed without tools for
effective cleaning.
-
Drive spindle is 3 ½”
diameter stainless steel with Cast-On Urethane Lagging for
increased load capacity. Spindle has groove for V-guided
belts for optimum performance.
-
Center Drives allow
additional clearance on ends when needed. Unique tool-less
construction for guarding and back bend rollers.
|
|
Curve
Conveyor Features & Benefits:
-
Frame is constructed of
continuous TIG welded 304 stainless steel and is designed
with minimal horizontal surfaces for optimum cleaning.
-
Tool-Less quick release belt
tension devices for quick effective sanitation.
-
Stainless Steel multiple rod
bedplate to eliminate conveyor belt sticking in wet
applications.
-
Pinch roller belt drive
system operates at minimal belt tension for long nose bar
bearing life.
-
All rollers including the
pinch roller drive operate outside the food zone to ensure
non-contamination of the belt surface.
-
Solid Ertalyte 5/8” diameter
nosebars for transferring small products.
-
Bearings are designed for
low pressure (100 psi max) soap and water cleaning cycles.
-
Durable white FDA approved
urethane belts.
Dorner
7600 ULTIMATE OPTIONS:
The ULTIMATE Series has been
engineered for Fast & Effective Sanitation in the most
demanding environments. These include RTE foods, raw protein
(meat - poultry - fish),
dairy and other environments with high pressure sanitation
requirements.
-
Solid Stainless Steel Cross
Members (No Hollow Tubes)
-
TIG Welded Stand Offs Keep
Fasteners out of Food Zone
-
Machined Weld on Bearing
Housing Assembly
-
Threadless Stainless Steel
Support Stand Feet
-
Plastic Bearings for Cold
Environments, Eliminates Grease Contamination
|
|
7600 Series Straight Conveyor
Construction Details: |
 |
 |
Tool-Less Tip-Up Pulley
for quick release of belt tension. |
Nose bar Transfer Option
for small product transfers.
Available in: 1/2”, 1” & 1 7/8” |
 |
 |
Cast On Urethane Lagged Pulley
to ensure a permanent sanitary bond. |
V-Guided Belting
for positive belt tracking. |
 |
 |
Center Drive Option
for dual Nose bar Transfers and increased
end clearance. Tool-less dis-assembly
for quick sanitation. |
Stainless Steel Gear motors
located outside food zone. |
 |
 |
Round Cross Members
eliminate horizontal surfaces
for complete drainage. |
Solid UHMW Wear Strips
are quickly removed without tools for
cleaning. Most pieces are identical &
completely interchangeable. |
 |
 |
Belt Tension System
with welded Bearing Support
for tensioning and tracking with
ACME threads. |
Stainless Steel
Welded Frame Construction
eliminates fasteners in food zone.
(Continuous TIG welding) |
|
7600 Series Curve Conveyor
Construction Details: |
 |
 |
Stainless Rod Bed Plate
reduces belt sticking
in wet applications. |
Nose Bar Pulleys
are 5/8” diameter
for tight transfers. |
 |
 |
Quick Release
Belt Tension Systems
for easy cleaning. |
Pinch Roller Drive
ensures no contamination
of the belt in the food zone. |
|
Available Pre-Engineered Options: |
 |
 |
Nose Bar Pulleys
are ½”, 1”, & 1 7/8” diameter
for tight transfers. |
Belt Lifters
for easy cleaning on
wide or long conveyors. |
 |
 |
Belt Scraper
UHMW blade removes
build-up & is easily adjusted. |
Stainless Steel Bed Plates
provide continuous support for
delicate product. (dry applications only) |
 |
|
Frame Cut-Out
allows access for internal frame washing. |
|
| ULTIMATE Options |
 |
 |
Plastic Bearings
for Cold Environments
Eliminates Grease Contamination. |
Machined Weld
on Bearing Housing Assembly |
 |
 |
TIG Welded Stand Offs
Keep Fasteners out of Food Zone |
Solid Cross Members
(No Hollow Tubes) |
 |
|
Thread less Stainless Steel
Support Stand Feet |
|
|
Download Dorner Conveyor Product Literature
|
Conveyor Services
