• Belt widths: 6” to 60” (152mm to 1524mm)
• Lengths: 36” (914) to 999” (25.4m)
• Load: 20 lbs /square foot of belt
  (90 kg / square meter of belt)
• Belt speed: 233 ft/min maximum
  (71 meters/min)
• Frame material is 304 stainless steel
• Bearing material is 400 stainless steel
• Bearing lubricant is H1 type FDA lubricant
• Wear Strip Material is solid UHMW
• Welds are continuous TIG
• Flat and Cleated Plastic Chain options available

• Belt widths: 8” to 36” (152mm to 914mm)
• Total Lengths: up to 99’ (914mm – 30m)
• Load up to 20 lbs /square foot of belt
  (90 kg / square meter of belt)
• Belt speed: 175 ft/min maximum
  (53 meters/min)
• Frame material is 304 stainless steel.
• Degree of curves: 15º - 180º
  8” and 10” widths available in 30º increments
  12” through 36” widths available in 15º increments

Features & Benefits:

• Frame is constructed of continuous TIG welded 304 stainless steel and is designed with no horizontal surfaces for optimum cleaning.
• All bearings are 400 stainless steel, filled with H1 FDA lubricant and mounted in cast stainless steel housings for maximum performance in washdown environments.
• Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
• Belt tracking mechanism is constructed of 304 stainless steel and is externally mounted to the frame with adequate clearances for cleaning. No external threads are used.
• Conveyor is designed to withstand high pressure (100-1500 PSI) spray and chlorinated solutions

Standard Options: